V15.0 C1p Release Notes

New

Key	Component	Summary
TD-22987	12d Field - General	Added dongle in use to 12dField attributes
TD-22741	12d Field - General	Added draw box to GNSS Status panel and GNSS sentence support to show satellites in use.
TD-22589	12d Field - General	Added support on appropriate Leica TPS instruments for 'precise' measurement mode
TD-23038	12d Field - General	Added the instrument type to 12d field control bar
TD-22520	12d Field - General	Check Shot panel, group check shot results in a clearer way
TD-22424	12d Field - General	Support added for Emlid GNSS units
TD-22989	12d Field - General	Tunnel profile chainages added to the 12dField special chainages list
TD-22988	12d Field - General	Tunnel Setout Panel, added hotkey tunnel_so_seg_per_from_last_pt to populate the setout element and % from the last shot taken
TD-23094	12d Field - Setout	Reduced width of point setout panel and extra point attributes.
TD-22624	12d Synergy Integration	Optimised Synergy calls during Master Shares
TD-22541	ADAC	Added ADAC/Models to custom_attributes.4d
TD-22643	Base	Ability to reset all GUID filenames for a copied project
TD-22733	Base	Ability to save default text style within 'Read XYZ General' parameter file
TD-22986	Base	Added “Check Strings in Models Vs Mapfile Models” to Utilities =>A-G =>Check/clash
TD-22629	Base	Added a "clean" tick box to the Read/Write Pavement Management Attrs panel
TD-22587	Base	Added a choice to allow copy project model to merge into existing model
TD-22639	Base	Added collapsible groups feature in the Output Window on the Authorization Details/Error panel
TD-22641	Base	Added defaults/defaults reset to macros 12d icon
TD-22588	Base	Added extra snaps to a toolbar
TD-22686	Base	Added Model of label lines to Label Contours panel
TD-22850	Base	Added plan mode to Street View
TD-22891	Base	Added some extra settings for the on-screen keyboard
TD-23087	Base	Additional Logging to look for potential slow downs
TD-22638	Base	Always keep project start-up details
TD-22544	Base	Attributes Editor menu: Sorting out "Attribute definitions editor" and "Custom attribute editor"
TD-22765	Base	Better naming and positioning for Cad Leader buttons: string name; vertex text; segment text
TD-22553	Base	Changed “Custom Attributes” field to “Block name” and “File” to “File area”
TD-22543	Base	Changes to names and menus for Global attributes/Custom attribute options
TD-22782	Base	Choice to use different regular expression engine for replace attribute panels
TD-22444	Base	Clear the default panel value for Data Source > Filter > String info > Type for trimesh operation panel
TD-22687	Base	Contour functions can now be optional
TD-22652	Base	Delete all orphaned .cloud files
TD-22368	Base	Drainage_create_networks_panel.4do now shuts down on 12d Model exit
TD-22371	Base	line_marking_panel.4do now shuts down on 12d Model exit
TD-22796	Base	Log all applied environment variables
TD-22366	Base	Macro Drainage_culvert_create__panel.4do now shuts down on 12d Model exit
TD-23071	Base	Macro Label_Segment_grade: added About and Help buttons, and to shut down on exit
TD-22617	Base	Mods to MetaConnex menu
TD-22592	Base	Mods to the macro Set_Global_Attributes_panel.4do
TD-22998	Base	Mods to Xs_filer_func_panel macro
TD-22618	Base	More Object Tree controls on Project Settings panel
TD-22680	Base	Perspective OpenGL view: Added "View Height Render Settings" to "Perspective OGL View =>Settings" menu
TD-22807	Base	Project Launcher: Popup menu option to reset all GUIDS disk names
TD-22653	Base	Project Name now included in Output Window
TD-22630	Base	Project Settings: Added more defaults
TD-22611	Base	Recent Projects panel: Can now open new project without closing the existing opened project
TD-22194	Base	Removed "Project =Management =>Old =>Projections" from the menu
TD-22799	Base	Removed minus out of Write DXF 12-14 panel name
TD-22844	Base	Set MetaConnex in grid
TD-22788	Base	Snaps panel: Added the Snaps toolbar letter used next to the text
TD-22979	Base	Sped up highlight in Set MetaConnex grid
TD-22505	Base	Split replace attributes panel into two names and text values
TD-22790	Base	Super Inquire: Select Alignment and tin and show chainage, offset to alignment and height of tin
TD-22678	Base	Template icon for Template box
TD-22462	Base	Tin Height Legend can now Create png with Opacity
TD-22627	Base	Tins on a Section View Inquire
TD-21579	Base	Tins on a Section View Inquire
TD-22540	Base	Track menu: existing Calculate Cant moved to "Old" menu. Put new one in its place
TD-22664	Base	Updated 12d Error on startup to when current 12d build date greater than maintenance stop date
TD-22443	CAD	Added the choice to have number cells when creating table from CSV with numeric content
TD-22415	CAD	Table style: added properties to disable horizontal or vertical lines
TD-22233	CAD	Tables: Justification by columns
TD-22498	Chains	Added the choice to not focus on finish button when save chain
TD-22576	Chains	Internal chain command to exit 12d
TD-22446	Chains	User now has the choice to stop overwrite warning when writing chain file
TD-23101	Design	Addition to menu under Design->Pavement
TD-22932	Design	BIM Objects create now showing segmented linemarking in preview
TD-22895	Design	Design quick now allows seed file from local, customer, user_lib and library
TD-22781	Design	Track menu modification: Move Plot rails to old and add section to snippet
TD-22559	Design	Track: Calculate Slew - Added offset vertex attributes, offset source name and chainage options
TD-22806	Design	Track: Can now calculate CL function box and generate a regression alignment
TD-20991	Design	Track: New calculate cant panel
TD-22716	Design	Track: Section to snippet: new panel
TD-22719	Documentation	Auto dumping of images: For Project Settings, only a dump of the main panel is done and not each tree node
TD-22722	Documentation	Auto dumping of images: Project Settings: dumping each tree node
TD-22420	Drafting	Added cad: segment: move segment to toolbar
TD-22416	Drafting	Added override of individual line colour, style, weight for drafting table grid
TD-22419	Drafting	Added Snaps Cad Line:segment to toolbar
TD-22234	Drafting	Individual format for each row or column of drafting table now allowed
TD-22235	Drafting	Side way texts in drafting table now allowed
TD-22105	Drainage	Add and delete buttons no longer missing from edit_bypasses
TD-22590	Drainage	Added a new WNE Hydrology method item for AR&R IL-CL to the Method choice list
TD-21994	Drainage	Added Preburst rainfall procedure as per AR&R2019
TD-22367	Drainage	Aquaplaning_Risk_Panel.4do now shuts down on 12d Model exit
TD-21845	Drainage	ILSAX with IL/CL now has depression storage disabled
TD-22650	Drainage	Method to convert drainage.4d file from YACC to XML
TD-22670	Drainage	QWN now allows selection of a tin and consequently minimum cover / minimum grade functionality
TD-22871	Drainage	QWN: Set defaults based on water string defaults
TD-22575	File I/O	Added "Scale Z" to Symbols on DWG export
TD-22586	File I/O	Added a choice to see less warning message when write model tree data to dwg
TD-22734	File I/O	Read DWG/DXF Data: Made the default for Browse
TD-22632	File I/O	User defined Output separator for DWG Layer
TD-22623	File I/O	Write LandXML file: Cant attributes can now be exported
TD-22766	GIS	Check and auto correct GIS capabilities URL
TD-22519	GIS	WMTS: Added the option to convert to Local Coordinate System
TD-22910	IFC	Ability to read in strings with string, segment and vertex attributes
TD-19327	IFC	IFC for TMR Survey
TD-22922	Installation	AutoUpdater now shows more detailed info for installed version
TD-22819	Installation	Improvements to AutoUpdater GUI
TD-22463	Macro Language	Call for High Res OpenGL Image
TD-22761	Macro Language	Call to check if text contains any literal escape characters
TD-22732	Macro Language	Call to check XML_Node for CDATA
TD-22783	Macro Language	Call to null triangles by angle and length from point
TD-22671	Macro Language	Calls for getting/setting water defaults
TD-22495	Macro Language	Calls to highlight in perspective views
TD-22715	Macro Language	Calls to Set data on Choice_Box without validation
TD-22232	Macro Language	Create XML text Node call now supports CDATA format
TD-22957	Macro Language	Macro call to null triangles by angle and length with the choice to regenerate boundary
TD-22656	MTF	Collapsible regions for snippet parameter widgets
TD-22911	MTF	Loop Removal now preserves colours of multicoloured strings
TD-22944	MTF	Modify All to String, Modify Insert at String, made "Current side" default for "Side to search"
TD-22751	MTF	Row number snippet automatic parameter
TD-22496	Plotting	Added project settings to change the auto open of PDF plot file
TD-22447	Plotting	MPS: Panel to enable/disable multiple pages and chapters
TD-22633	Survey	"equipment used" attribute ability carried through to Traverse Spreadsheet vectors traced from XML
TD-23078	Survey	Allow FLD files to be added to existing tree based SDR Function
TD-22939	Survey	SDR Check Coordinate opcode now supports GPS
TD-22635	Survey	Set GNSS Base positions and attributes for GNSS Vector Report
TD-22417	Trimesh	Added trimesh edge length to super inquire
TD-22640	Trimesh	Drape to tin or height
TD-22613	Trimesh	Global Change Trimesh Solid State
TD-22418	Trimesh	Global Change Trimesh Solid State
TD-22763	Trimesh	Supertins now supported when intersecting trimeshes with tin
TD-22824	Volumes	Cut and Fill Trimeshes between two tins: Added to "Volumes =>Trimesh" menu

V15.0 C1n Release Notes

New

Key	Component	Summary
TD-22330	Base	Create box of pipes to place along a given super string
TD-22336	Base	Project Launcher: Display last modified time instead of last accessed time
TD-22769	Design	Pavement Management: change name to “Pavement Styles Manager”
TD-21051	Drainage	DDA: Add warning for Depth and Head Rating curves when curve does not start at 0

V15.0 C1m Release Notes

New

Key	Component	Summary
TD-22245	12d Field - General	Add the Point id type to the setout Names panel
TD-22383	Base	AttributeControlBar: mods to existing choices and add choices and
TD-22198	Base	Dongles.4d installer
TD-22324	Base	Models to Share Out: add tick to filter out existing shared out objects
TD-21531	Base	object tree improvements to SA Style Output option
TD-22290	Base	Use double click to highlight the SA for resolve SA chain command
TD-22187	Base	XSLT Debugging Flag
TD-22273	File I/O	Drag and drop for DGN files
TD-21702	Plotting	Set weight to conduit width based on a specified plot scale
TD-22272	Widgets	Document Log_Box and Output window keyboard expand and collapse of groups

V15.0 C1k Release Notes

New

Key	Component	Summary
TD-21283	12d Field - General	12d Field hidden point tolerance check
TD-21716	12d Field - General	Added phase centre value into "12df_GPS_PROFILES.4d" and applied on profile selection.
TD-21742	12d Field - General	Allow a compact start up panel for 12dField
TD-21511	12d Field - General	GVR: Place symbols on averaged and observed points
TD-21654	12d Field - General	Report on GVR averaged observed points to TSS Points.
TD-21582	12d Synergy Integration	Project=>12dSynergy=>Pending: Change List to Grid
TD-21470	12d View	Markup option
TD-20796	Base	"Create Z-Values from String to Tin Differences" panel created old 3d string
TD-21840	Base	12d start up to better handle environment variables specifying Synergy URIs
TD-21763	Base	12da reader: skip raster element when image file link is not found
TD-21851	Base	Better progress messages during Project migration
TD-21835	Base	Choice in delete model tin panels to delete shared out data
TD-20257	Base	Combined leader format to multiple string properties
TD-21570	Base	Create Legends from the names.4d
TD-21990	Base	Force loading models containing tins at project startup
TD-21904	Base	Information leader: choice to use multiple line text for when typing the format text
TD-21627	Base	Join strings options preserving segment linestyles from input strings
TD-20597	Base	Markup option
TD-21635	Base	PDF reports auto open after created
TD-21578	Base	Project Details Panel: Make resizable and autoresize lists
TD-21568	Base	Project Launcher => Settings => Default Project Location folder for new and existing projects
TD-21734	Base	Projection File Editor: Correctly Save the Order of Projections and Projection Groups
TD-21360	Base	Spell check while typing in text edit box
TD-21667	Base	Street view: ddx support
TD-21616	Base	Super Inquire: Choice to display longer texts in multiple lines
TD-21615	Base	Super inquire: new settings to display without grid
TD-21842	Base	Tin Information Table
TD-21567	Base	URL Hyperlink Access through 12d Model and 12d View Attribute Lists
TD-21722	Chains	Customising default type for new chain commands
TD-21723	Chains	Double click to preview chain command
TD-21641	Chains	Make chain parameters work with directory box
TD-21952	Chains	Option for HEC-RAS DDA Flooded widths calcs (macro and chain)
TD-21581	Design	Increase the size of the "Kerb Return Function" panel
TD-21517	Design	Pavement Manager: Kerb Snippet update to match v14 behaviour
TD-21585	Design	Snippets: create tooltips for parameters in pavement snippets
TD-21625	Design	Wildcards for link names defining Named Grades
TD-20613	Drainage	ARR2019 Il-Cl Dynamic Analysis Method
TD-21303	Drainage	CSD: Be able to run Rational Analysis
TD-21774	Drainage	CSD: Move/delete functionality like QWN
TD-21731	Drainage	Cut/copy/paste to/from grids in drainage.4d editor
TD-21798	Drainage	HEC-RAS 6.4 and 6.4.1 for flooded widths
TD-10175	Drainage	Link Critical Froude number stored as a link attribute
TD-21724	Drainage	Place node markers: offset distance option
TD-21956	Drainage	Regrade links log line messages with reference info
TD-21573	Drainage	Water House Connections to BIM
TD-22061	Drainage 2D	2D TUFLOW dt and FLT Map output commands added
TD-22047	Drainage 2D	TUFLOW 2023 03 AC update
TD-21394	Drainage 2D	TUFLOW 23 03 AB Release Update
TD-21928	File I/O	Another case for repairing bad LAS headers
TD-21520	File I/O	Landxml read: Read rail cant data
TD-20979	File I/O	Landxml write: output file includes the type of transition mapping file used
TD-21972	GIS	GIS menu rearranged
TD-21137	GIS	Option to access WFS data
TD-21136	GIS	Option to access WMS data
TD-21908	Macro Language	Call for GridCtrl_Box to return the cell row and column of focus
TD-21274	Macro Language	Check for real being null or minus null
TD-21975	Macro Language	Convert text to legal XML text
TD-21204	Macro Language	Convert uid to 64bit Integer
TD-21515	Macro Language	Cookie cut trimesh using a polygon
TD-21536	Macro Language	Create_strings_from_sections
TD-21834	Macro Language	Delete model and tin with optional check for share out
TD-21903	Macro Language	Enable spell checking for Text Edit Box
TD-21522	Macro Language	Form_trimesh_from_polygon
TD-21234	Macro Language	Get the chainage-height profile for a string
TD-21619	Macro Language	Highlight points, lines and arcs on view
TD-21934	Macro Language	List files/folders in a directory
TD-21891	Macro Language	Remove share out status of models
TD-21836	Macro Language	Remove share out status of tins
TD-21200	Macro Language	Set border style of text style data
TD-21890	Macro Language	Set highlight linestyle and weight
TD-21833	Macro Language	Share in tin to current project with specified model
TD-19954	Macro Language	Tin_Plan_Area_At_Elevation now works for supertins.
TD-21235	Macro Language	xy_inside(Element polygon,Real x,Real y)
TD-21648	MTF	Add side resolving syntax "=>" for smart chainage "Intersection of a Link"
TD-20090	MTF	Decision String Exists section width
TD-21528	MTF	Modifier: Intersect Links with Link
TD-20582	MTF	Modify Manipulate Attribute now available in a panel and documented
TD-21728	Plotting	Long Section plot: Cuts: be able to specify the labelling of the Height of a cut string
TD-21932	Plotting	LS plot with plan component to allow primary with no VG
TD-21580	Super Alignment	"Edit & Sameas" button on the Edit SA / Properties / Label Panel and "Change Super Alignment Style" Panel
TD-21960	Survey	Ability to enter bearing corrections in radiation blocks
TD-22188	Survey	New Instrument type: x,y,z,id,code,attributes
TD-21841	Survey	SDR Editor tick to skip processing all SDR Attributes
TD-21861	Survey	SDR XSLT now handles Multicodes and has improved Attribute Reporting
TD-21714	Trimesh	"Trimesh from Vertical Data" panel
TD-21720	Trimesh	Add a chainage interval in converting curve water pipe to trimesh
TD-21574	Volumes	Add totals to Polygon Report

V15.0 C1j Release Notes

New

Key	Component	Summary
TD-20052	12d Field - Pickup	SDR Pickup feature code panel, allow Inc/Next keys to set a user default id when blank
TD-21893	Base	Choice to write view favourite file number in hex float
TD-21282	Base	Delete empty text attributes
TD-21651	Base	Turn Automatic Update checker on
TD-21523	Design, MTF	Modifier Remove By Pattern, add a remove absolute option
TD-21354	Design, MTF	Named Grade: Normal/Mirror Extra Grades and Min/Max Xfalls
TD-21485	MTF	Update Pretty Description of the Fixed Decision Modifiers
TD-21660	Sharing	Add Shared Tins To Project to better handle existing Shared in Tins
TD-21563	Survey	Traverse spreadsheet drawing speed ups

V15.0 C1i Release Notes

V15.0 C1h Release Notes

New

Key	Component	Summary
TD-20882	12d Field - General	AP20: icon for prism location indicates IMU is active when in tilt mode.
TD-20930	12d Field - General	Fail more gracefully if AP20 is not clicked in correctly for height
TD-21115	12d Field - General	For Leica TPS firmware >= V7 prediction and lock type available in 12dField
TD-20339	12d Field - General	GNSS Vector Panel
TD-20948	12d Field - General	Leica MPR122 availability needs to be user definable.
TD-20921	12d Field - General	Manual tape measurements for Topcon Generic TPS
TD-21080	12d Field - General	New type "None" for GNSS N value, uses ellipsoid height only.
TD-20806	12d Field - General	Reduce Topcon TPS options to Generic and External Link.
TD-21059	12d Field - Pickup	Enhance 12dfield_sdr_config to populate "Function" and "Field file" boxes.
TD-21366	12d Field - Pickup	Hide the "Comment" field in the 12dF SDR Feature Code panel by default
TD-21040	12d Field - Pickup	SDR Pickup panel, updated the RHS bitmaps.
TD-21026	12d Field - Setout	Improve error messages for corrupted 12dField setout backup FLD files.
TD-20942	12d Field - Setout	Missing attribute to indicate offset point was used, added so_offset_point_base_used
TD-21110	12d Field - Setout	Point Setout added extra attribute for actual direction of offset point
TD-21041	12d Field - Setout	Point setout, add Clear button to zero offsets.
TD-21105	Base	Add Copy path to the attribute grid
TD-21275	Base	Add Default pixels to mm plot factor to Project Settings
TD-20920	Base	Add message to Wait_on_widgets for when a panel is resized
TD-21046	Base	Add sorting by a column for attributes table
TD-20901	Base	Addition of Corridor width to panel to check String to parallel & Second strings within a distance of X
TD-20980	Base	Allow picking of extrusions edges and points
TD-20521	Base	Allow picking of extrusions faces
TD-21278	Base	Change dimension styles in the setups, text aligment property should use text_aligned_angle
TD-21276	Base	Create many rasters from jpgs and jgw files
TD-21277	Base	Delete Options Log Files: add "Delete older than X days"
TD-20740	Base	Join Many: remove individual segment colour/linestyle
TD-21104	Base	Keep attribute tree expansion when moving through segments and vertices
TD-20919	Base	Log Line Group for Recent Projects List
TD-21113	Base	Model Delete: differentiate between project models and removed models
TD-20972	Base	Option to cut sections through strings at regular chainage interval only
TD-21004	Base	Option to set all Real attributes with the value of "Input/output null height" to NULL
TD-20956	Base	Picking extrusions in orbit
TD-20891	Base	Re-orient all faces coherently
TD-20876	Base	Test projects: make them Neo
TD-21112	Base	Tin Delete: differentiate between project tins and removed tins
TD-21054	Base	Updated Function Attributes Editor
TD-21053	Base	Updated Model Attributes Editor
TD-20935	Base	Updated panel to send tin raster to back of views
TD-21052	Base	Updated Project Attributes Editor
TD-21061	Base	Updated Tin Attributes Editor
TD-21280	CAD	Add point create to CAD Point toolbar
TD-20862	CAD	Make CAD Leader information Tin Depth support all TIN types
TD-20562	Design	Add various features to Rail slew calculator option
TD-21111	Design	Template Delete: differentiate between project templates and removed templates
TD-20575	Design	Track: Add various features to Rail CalcCL option
TD-12140	Drainage	Create Culvert - Help Button and CodeShutdown
TD-21090	Drainage	Create custom list of attributes for use during Dynamic Drainage Analysis run
TD-20877	Drainage	Create hydrograph from peaks now uses attribute groups
TD-21302	Drainage	CSD: Add move functionality as in QWN
TD-21402	Drainage	DDA: Create plan plots and long-section profiles using attribute groups
TD-2873	Drainage	DNE documentation of tabs and input fields
TD-21162	Drainage	DWS: Rule/control builder called from another macro
TD-20792	Drainage	HECRAS 6.3.1 for dynamic flooded width added
TD-21154	Drainage	QWN: Change 'Default Elevation' to be anything other than '-null'
TD-21153	Drainage	QWN: Change the order of the information in QWN Startup to match Water Defaults
TD-21208	Drainage	QWN: Changes to default panel
TD-21151	Drainage	QWN: Enhance QWN to allow the model for Bypass Lines to be specified by the user or populate relevant field
TD-21152	Drainage	QWN: Reduce confusion about what 'Override Defaults?' does
TD-21005	Drainage	Water String: check if Trimesh Rotation Att is "Input/output null height" and set to NULL
TD-21296	Drainage 2D	2D Catchment flow lines (SA - source area) - distribute flow to all cells
TD-21467	Drainage 2D	2D Quick Analysis: WaterRide Format
TD-21071	Drainage 2D	2D result tin to use default settings for read results
TD-21132	Drainage 2D	Change panel name from Roadflow to 2D Quick Analysis
TD-21096	Drainage 2D	DDA 2D messages: remove duplicates and create groups
TD-20837	Drainage 2D	TUFLOW 2020 10 AF Patch Release
TD-20716	Dynamic Water Supply	Concept Water Supply
TD-21007	File I/O	Allow the word NULL for a null value in 12da/12dXML files
TD-20774	GIS	Access feature data using REST service
TD-19576	GIS	GIS Interface to WMTS (Web Map Tile Service)
TD-20928	Macro Language	2D drop to a polymesh face
TD-20751	Macro Language	Add a Weight_Box to the macro language
TD-21106	Macro Language	Call to access the modern function for parsing text lines in words
TD-21126	Macro Language	Call to convert real number to text supporting negative precision
TD-20945	Macro Language	Check if a polygon is planar
TD-20750	Macro Language	Delete drainage nodes
TD-20753	Macro Language	Get the absolute path from relative path
TD-20780	Macro Language	Get the type of an XML Node
TD-20749	Macro Language	Insert drainage nodes
TD-20668	Macro Language	Model_attribute_delete_all() has a dummy argument
TD-20952	Macro Language	Move_attributes
TD-20752	Macro Language	Read STL file
TD-20933	Macro Language	Replace an element
TD-21236	Macro Language	Save and read output window to XML
TD-21209	Macro Language	Write 12d data calls: extend the bool flags to cover the new choice of output null keyword
TD-21237	Macro Language	Write 12d data macro calls, extend the bool flags to cover the new choice of output hex float for TIN
TD-21238	Macro Language	Write 12d data macro calls, extend the bool flags to cover the new choice of output null attributes
TD-21033	MTF	Adding wildcard support for modifier: "Decision String Exists"
TD-20943	MTF	Allow user to overide default section width for modifier: "Reinterface Tin"
TD-20822	MTF	Allow user to override default section width for modifier: "Fixed Link - To Tin"
TD-21030	MTF	Apply MTF, populate function name and auto load apply defaults on centreline select.
TD-20715	MTF	Default for "Modify Link to tin" is now "Modify height, hold width"
TD-20916	MTF	Intersection cut number for smart chainages: "Intersect strings" & "Cut ref with other string"
TD-20649	MTF	Modify to trimesh, allow multiple trimeshes of the same name
TD-21003	MTF	New modifier "Fixed - Remove by pattern"
TD-21103	MTF	Snippet call "set_model_attribute" updated to create the model if it does not yet exist
TD-21108	MTF	Snippet call "set_project_attribute" parameters now allow token substitution
TD-20917	MTF	Syntax to define snippet parameters on multiple lines
TD-20823	Plotting	MPS: Plotter override if defined at the chapter or page level
TD-20416	Plotting	Plots: 12d archive files for Models in plot units
TD-21359	Plotting	Raster DPI from plotter definition in output PDF
TD-20794	Sharing	Master Share File no longer compresses multiple spaces
TD-17865	Super Alignment	Computator Kret/Culdesac Create: Right Side Drive Option
TD-21045	Survey	"Pavement Conformance" renamed to "General Conformance"
TD-21166	Survey	Save and reuse resection co-ords
TD-21243	Survey	SDR Recalc Log lines can be really slow
TD-20926	Trimesh	Deprecate "Convert Faces to Trimesh"
TD-20810	Trimesh	Repair non manifold edges by removing faces
TD-20983	Trimesh	Skip non-planar polygons in Trimesh from 3D Planar Polygons
TD-20927	Trimesh	Trimesh from 3D Planar Polygon: Create log lines for invalid planar polygons
TD-20745	Views	Non openGL Plan views can only show polymesh

V15.0 C1g Release Notes

New

Key	Component	Summary
TD-20706	12d Field - General	Attributes for tps target, names, type, constant, aperture.
TD-20764	12d Field - General	Comment panel, current date/time not updated for TPS Sim, Trimble or Topcon.
TD-20358	12d Field - General	ID support for Leica AP20 smart pole
TD-20631	12d Field - General	Relectorless tracking working for Topcon Generic instruments.
TD-20610	12d Field - General	Update instruments other than the Leica to new bitmaps and prompts.
TD-20510	12d Field - Setout	Change the auto clear chainage, offset & height options to allow leave, clear or zero the value.
TD-20677	12d Field - Setout	Further settings for size and colour of pole and setout/pickup points on plan view.
TD-20465	12d Field - Setout	Iterate positioning with 3D chainages improvements
TD-20488	Base	Add Comment Buttons to "Create/Edit Attribute Manipulator File" Panel
TD-20545	Base	Attribute Manipulator: Add Pt/Line type to string properties list
TD-20546	Base	Attribute Manipulator: Add String type to string properties list
TD-20738	Base	Attribute Manipulator: Add Vertex Indices Number
TD-20423	Base	Attribute Manipulator: Can now update existing attribute values
TD-20469	Base	Attribute Manipulator: Insert new rule goes after the current selected rule
TD-20452	Base	Better information in Output Window for licensing and remove misleading errors with days left on nodes file
TD-20697	Base	Create buildings for tins needs to remove vertex non tinability
TD-20589	Base	Enhancement to the "Computate strings" macro
TD-20380	Base	Find and replace text in drafting leaders and table
TD-20468	Base	Ramp function add crease and optional tin
TD-20470	Base	Search and replace attribute values
TD-20522	Base	Text Spell Checker
TD-20563	Base	Turn off heads up display by default
TD-20552	Base	View Toggles: Behaviour when Draw Solid and Draw Edges are both off
TD-17717	CAD	"Snaps Cad" choice to select a segment
TD-20471	Chains	Capture and test the return code of a external exe run from a chain command
TD-20591	Chains	Commands to control models tins sharing
TD-20588	Design	Add "Computate Strings" to menu and toolbar
TD-20221	Design	Add a project attribute in new pavement manager for largest number of attributes set
TD-19682	Design	MTF Create polygon option to allow selection of the HINGE
TD-19684	Design	MTF Create polygon option to create multiple polygons between 2 links
TD-19683	Design	MTF create polygon with new options for end cap formations
TD-19921	Design	Tin from trimesh (top bottom) nulling update
TD-20634	Design	Tin from trimesh top/bottom to allow wilcards for name and model
TD-20583	Design	Update of new pavement snippets to reduce the number of layers created
TD-20733	Drainage	3d xsection chord interpolation - better error messaging and speed up
TD-20642	Drainage	DDA will not run with hydro file ARI from and to values the same
TD-20782	Drainage	DDA: Improve loading of info/warning/error messages on completion of analysis (Build 192)
TD-20698	Drainage	QWN move individual pipes
TD-20006	Drainage	QWN: Finalise panels for editing/deleting of nodes/links
TD-20528	Drainage 2D	Roadflow: add flt output command for ARR 2019 elev, depth and hazard
TD-20672	Drainage 2D	TUFLOW AE version update
TD-20347	Drainage 2D	TUFLOW exe and DLL update to 2020 10 AD
TD-20586	File I/O	Output to LandXML allow user to choose LandXML version
TD-20607	Macro Language	Control models tins sharing
TD-20596	Macro Language	Ellipsoid distances from plan distances
TD-20492	Macro Language	Get_drainage_network_upstream_pipes and Get_drainage_network_downstream_pipes
TD-20669	Macro Language	Measure NZ Grid Azimuth
TD-20483	MTF	Add lowest and highest chainage attributes to MTF strings
TD-20484	MTF	Allow snippet widgets to have tooltips
TD-20737	Survey	Change "Pavement Conformance" to "General Conformance"
TD-20731	Survey	Change panel name of Measure Projection plane bearing and ellipsoid dist
TD-20663	Survey	NZ Grid Azimuth added to Projection Bearing/Distance Measure panel
TD-20329	Survey	Projection editor: auto fill compound projection using epsg code
TD-20419	Trimesh	"Create Trimesh Face Normals" now handle polymeshes
TD-20422	Trimesh	Explode Trimesh: allow for planar and non planar faces
TD-20421	Trimesh	Polymesh: an option to get the boundaries of non-triangle faces
TD-17721	Views	Perspective OpenGL View: Default Shade angle to be 35 degrees.

V15.0 C1f Release Notes

New

Key	Component	Summary
TD-19938	12d Field - General	12dField config file paths, check and document.
TD-20061	12d Field - General	Add check to detect whether NMEA data has been rounded to 1dp
TD-20175	12d Field - General	Add SDR Memo for changes to TPS measurement settings.
TD-20014	12d Field - General	Add TPS Sokkia (Generic) to instrument list.
TD-20007	12d Field - General	Captivate 7 firmware, add setting of loss of lock prediction duration
TD-19812	12d Field - General	Complete revamp of TPS joystick functionality.
TD-20064	12d Field - General	GNSS localization, make n-value optional.
TD-20060	12d Field - General	GNSS localization, write 12da of local string/trimesh to localization file
TD-20046	12d Field - General	GPS Client should not filter NMEA messages.
TD-20008	12d Field - General	Leica TPS, prevent use of function keys when in prediction mode,
TD-20366	12d Field - General	Multiface lock modes for Leica, GUI not refreshing correctly on done.
TD-20004	12d Field - General	Removed custom user keys for each setout panel.
TD-20092	12d Field - General	TDF GNSS Localisation Export Local String to Model
TD-20048	12d Field - Pickup	Point setout, "Angle is valid" overwriting message box
TD-19994	12d Field - Setout	All setout panel attributes should be stored with the primary panel.
TD-19995	12d Field - Setout	Basic segment setout should have the choice of string or segment chainage.
TD-20051	12d Field - Setout	Bogus error message on clearing setout strings
TD-20195	12d Field - Setout	Point setout panels, missing attributes for offset distance and direction
TD-20050	12d Field - Setout	Point setout, make offsetting a point more usable on a tablet.
TD-20053	12d Field - Setout	Point store setup was losing linestyle settings.
TD-20134	12d Field - Setout	Setout point, add vertex attributes for auto find settings
TD-20047	12d Field - Setout	Split clearing of setout offset/height difference into 2 boxes.
TD-20049	12d Field - Setout	Store point setup panel was not restoring the point-line setting correctly.
TD-20158	ADAC	Copy String attribute Group to Group to allow multiple attributes of the same name
TD-20186	Base	"Create Buildings" creates old strings.
TD-20017	Base	"Create polymesh" to have "Pass other data" tick
TD-20019	Base	Add Activate and Deactivate buttons to the Create/Edit Attribute Manipulator File panel
TD-16994	Base	Add missing View settings to View properties, favourites etc
TD-20282	Base	Add new option called Trimble LandXML Roading
TD-20018	Base	Additional choice to use vertex z value when explode symbols
TD-20124	Base	Attribute manipulator, copy and paste between different panels
TD-19924	Base	Attribute Manipulator: Change default Index from 1 to 0 for Segment property and Segment attribute
TD-19923	Base	Attribute Manipulator: Change default Index from 1 to 0 for Vertex property and Vertex attribute
TD-19222	Base	Batch migrating V14 to V15 projects
TD-19935	Base	Change icon for comment node in attribute manipulator
TD-19849	Base	Close text edit panel with CTRL Enter
TD-20217	Base	Drainage_headwalls_panel Shut down on exit added
TD-20123	Base	From_text_expression
TD-19997	Base	Global Height: Allow for empty Height field
TD-20164	Base	Head to Tail: choices to allow non-strings to Pass
TD-20163	Base	Leader Attribute Substitution
TD-19826	Base	Neo Classic Theme
TD-20216	Base	Pipe Controlbar: different icons for the Diameter/Culvert and the Invert/Centre/Obvert Choice boxes
TD-20153	Base	Street view: Show position
TD-19577	Base	Tin to strings: flag for "Don't include null triangles"
TD-20125	Base	View =>New view menu: put "Perspective OpenGL" above "Perspective"
TD-20281	Base	XYZ Ch/HT Message to use separators for large coordinates
TD-20305	Design	Add various features to Calc CL option
TD-20016	Design	Object Tree model naming for Components
TD-18210	Drainage	Capture Curve Viewer
TD-20402	Drainage	Capture Curve Viewer: add collapsible group for modifiers
TD-20404	Drainage	Capture Curve Viewer: Call edit_drainage.4d panel from macro not panel prompt
TD-20403	Drainage	Capture Curve Viewer: don't reset font size and point label parameters when changing curves
TD-20405	Drainage	Capture Curve Viewer: Make tooltips parameter-dependent
TD-19623	Drainage	CSD: Add "model locked" feedback to Tc Builder panel
TD-19625	Drainage	CSD: Tc Builder should initially be unpopulated
TD-20332	Drainage	Inlet Capture Curves: create separate fields for flow and depth ranges (and documentation)
TD-18416	Drainage	Inlet curves panel (HEC-22). Add button to link to capture curve viewer option
TD-19718	Drainage	WNE construction drainage data model to be updated for Object Tree naming
TD-20602	Drainage 2D	TCF direct rainfall update tickbox
TD-20032	Drainage, Drainage 2D	Update setting hydro box code
TD-18994	File I/O	Add support for filenames over 260 characters
TD-19922	File I/O	Read binary STL file with colours
TD-20314	File I/O	Remove restriction on character length for Model name when reading a Genio
TD-16880	IFC	Add support for Undo after IFC Read
TD-20181	IFC	IFC Read: Panel field for null z value
TD-20118	IFC	Read many option for IFC reader
TD-20162	Macro Language	12da library to accept 12dxml and 12dxmlz
TD-20183	Macro Language	Add some macros calls to calculate checksums of GPS NMEA strings
TD-20213	Macro Language	Call for tin from trimesh (top and or bottom)
TD-20117	Macro Language	Call for uploading a script to a GPS receiver
TD-20230	Macro Language	call to flip all faces of a trimesh
TD-19967	Macro Language	Call to run TUFLOW via tcf
TD-20235	Macro Language	Call to split drainage strings
TD-20130	Macro Language	Call to write metadata to xml files
TD-20251	Macro Language	Calls to draw element and model that work better in threaded views
TD-20381	Macro Language	Calls to draw elements in one view
TD-19899	Macro Language	Flip 1 trimesh face, array of trimesh faces and all trimesh faces
TD-20160	Macro Language	Tick box in compile and run macro panel to retain after run
TD-19955	Macro Language	Tin area at level to work with supertin
TD-20146	MTF	Add Duplicate to list of options in the modifiers edit panel
TD-20208	MTF	Link intersect tin documentation needed clarification.
TD-20065	MTF	MTF create string, trimeshes, select links from layers grid control update
TD-19969	MTF	Open variable links trimesh was missing last named edge information
TD-17744	MTF	Updates to the Apply MTF Manager
TD-19462	Plotting	Linestyle of Grids on Drainage Long plots, Long plots and X section plots
TD-19963	Plotting	MPS preview remove the unused raster loading
TD-20161	Plotting	Section long plot, add offset line style to box => offset string grid
TD-20054	Survey	Capitalization in some Topcon read/write panels incorrect
TD-18968	Survey	Combine both SDR reports into one
TD-18972	Survey	SDR: Radiation line when editing
TD-17893	Survey	Survey Data Reduction: Display Resection and Helmert prompts like Backsights
TD-20210	Survey	TSS add bearing text to segment attributes on import
TD-20386	Survey	TSS Additional survey mark conditions
TD-20209	Survey	TSS always show bearing correction column
TD-20277	Survey	TSS survey class doesn't update in Point Info panel
TD-20150	Trimesh	Flip one face of a trimesh
TD-20180	Trimesh	Polymesh picking and highlighting
TD-20445	Views	New Views created as non threaded
TD-20154	Views	Perspective Camera: show view name in message area
TD-19831	Views	Perspective OpenGL View: Allow XYZ stick diagram at all times and to be toggled on/off
TD-19830	Views	Perspective OpenGL View: colours and Text for XYZ stick diagram
TD-19868	Views	Super String Box Pipe wireframes plus solid drawing
TD-19872	Views	Super String multi extrusions wireframes plus solid drawing
TD-19869	Views	Super String Round Pipe wireframes plus solid drawing
TD-19871	Views	Super String with circle and arcs in extrusion wireframes plus solid drawing
TD-19870	Views	Super String with polygon extrusion wireframes plus solid drawing
TD-20444	Views	The default draw colour for edges is now RGB(128,128,128)
TD-19873	Views	Tins and Super Tins wireframes plus solid drawing
TD-19875	Views	Water String Nodes wireframes plus solid drawing
TD-19874	Views	Water Strings Links wireframes plus solid drawing
TD-19927	Visualisation	glelibrary draw wireframes with custom edges
TD-20094	Visualisation	New option to remove duplicate identical extrusions

V15.0 C1e Release Notes

New

Key	Component	Summary
TD-19818	Base	Attribute Manipulator: add Vertex symbol to Vertex Properties
TD-19910	Base	Copy project functions/templates missing from themes.
TD-19653	Base	Relative sharing for master share
TD-19819	Design	Replaced a panel prompt with new macro call Stockpile Create Macro
TD-19865	Drafting	Explode data source of drafting elements
TD-19841	Drainage	DDA: Add error messages when Drainage_Network connectivity is invalid
TD-19850	Drainage	DDA: Change Variable temporal patterns to support sub 1 minute rainfall data
TD-19864	Macro Language	Explode drafting elements
TD-19905	Macro Language	Get signed volume of a trimesh
TD-19418	Macro Language	Get_elements
TD-19809	Macro Language	Integer Get_file_read_only and Integer Set_file_read_only
TD-19908	Sharing	Share manager: convert master shares to direct shares
TD-19896	Survey	Height adjustment Panel: option to use Geotiff file
TD-19800	Trimesh	Additional warning for trimesh without volumes in Trimesh Volume Report panel
TD-18879	Trimesh	Create trimesh pavements from tins

V15.0 C1d Release Notes

New

Key	Component	Summary
TD-19773	12d Field - General	Add "Log" button to user comment panel rather than needing to hit "Finish"
TD-19592	12d Field - General	Create NMEA Replay String panel needs the current projection details
TD-19636	12d Field - General	Set Topcon default wait time default to 3599
TD-19525	12d Field - General	Station details, added number of readings for helmert and least squares setups.
TD-19698	12d Field - General	Topcon Generic TPS, remove environment variable for usage
TD-19768	12d Field - General	Topcon Generic, allow RC5 Handle button press to be set to hotkeys.
TD-19587	12d Field - General	User values panel needs to be TPS/GNSS aware.
TD-19600	12d Field - Setout	Replace the "TAB->" button with "Setup"
TD-19676	12d Field - Setout	Topcon generic TPS, add RC search buttons to locate prism panel.
TD-19780	12d Synergy Integration	Add support for synergy path for gsb file in NValues 4d
TD-19824	Base	Change Projection box on KML writer to the new Projection Box
TD-19631	Base	Global Model Rename: add tick box “Only show matches”
TD-19688	Base	Remove module requirements from Service chamber many
TD-19588	Base	Remove unused edge names from trimesh
TD-19598	Drainage	CSD: Add "Edit Rainfall File" button to edit_catchments panel
TD-19622	Drainage	CSD: Add Pick/Edit button to Tc Builder
TD-19797	Drainage	CSD: Show volume on catchment flows graph (NZ SCS requirement)
TD-19624	Drainage	CSD: Tc Builder needs model->Node->catchment->event message
TD-19597	Drainage	DDA: Replace US/DS invert elev with start/Stop elev for pump graphs
TD-19663	Drainage	DDA: Tables in the html reports to have sticky headers and hover highlighting
TD-19755	Drainage 2D	Add ability to run multiple tcf files from TCF editor
TD-19706	Drainage 2D	Attributes to/from clip board CodeShutDown and tick box for creating empty text attributes
TD-19517	File I/O	Add Cant Information to LandXML Output File
TD-19544	File I/O	Choice to read general XYZ as separate points
TD-19667	Macro Language	Add vertex at the end of super string
TD-19674	Macro Language	Change widget tooltip
TD-19833	Macro Language	Convert Trimesh Named Faces to Polymesh
TD-19802	Macro Language	Create polymesh from existing trimesh
TD-19603	Macro Language	Get geodetic projection datum names should combine information from different files as the box
TD-19665	Macro Language	Get set Perspective view eye target
TD-19664	Macro Language	Get set Plan view viewport
TD-19666	Macro Language	Get set Section view viewport
TD-19691	Macro Language	Get view usable area
TD-19803	Macro Language	Get_12dmodel_version(Integer &major,Integer &minor,Text &patch)
TD-19290	Macro Language	Panel_prompt does not need to display macro console
TD-19649	Macro Language	Projection box
TD-19288	Macro Language	Read only files and converting SDR function from FLD to 12dField
TD-19608	MTF	Modify to string, add "Current side" choice
TD-19615	MTF	Named grade adding spurious 'on fail' message to output window
TD-19610	MTF	Named grade: allow link and side to be added twice
TD-19519	Plotting	MPS: Model Node Centre Data Button
TD-19782	Survey	Run SDR Flat to Tree when creating a new function using FLD files

V15.0 C1c Release Notes

New

Key	Component	Summary
TD-19125	12d Field - General	12dF_BLUETOOTH_DEVICES.TXT, append new devices rather than overwrite.
TD-19301	12d Field - General	Added 12dF_EXCLUDED_ATTRIBUTES.4D allowing user exclusion of vertex attributes.
TD-19312	12d Field - General	Allow 12dField to use new Bluetooth connection when maintenance has expired.
TD-18546	12d Field - General	Deprecated virtual bluetooth com ports not shown if Win10, 1903 or better
TD-19523	12d Field - General	General settings tab menus tab does not differentiate TPS/GNSS routines
TD-19549	12d Field - General	GNSS 2.5 Helmert, translate x,y values were confusing because of 0, 0 based origin
TD-19548	12d Field - General	GNSS Helmert 2.5 Panel local n-value super alignment was not implemented.
TD-19479	12d Field - General	Make 12dField menus camel case
TD-19524	12d Field - General	Setup visualisation shouldn't be shown in GNSS settings panel
TD-19541	12d Field - Pickup	GNSS measurements were not being stored as specific GNSS coordinates.
TD-19241	12d Field - Pickup	Store some extra vertex attributes from the SDR function
TD-17205	12d Field - Setout	Added a Basic Segment Setout panel
TD-18109	12d Field - Setout	Added toggle for current tin/trimesh face highlighting.
TD-19481	12d Field - Setout	Basic segment setout missing hotkeys for NEXT, PREV & CURR
TD-18989	12d Field - Setout	Surface setout missing top/bottom Trimesh choice
TD-19267	12d Synergy Integration	Tweaks for Synergy based Master Share Files and projects MK II
TD-19807	Base	12d Update Service ticked on as the default
TD-19373	Base	Added another tickbox to env editor for the legacy update checker
TD-19545	Base	Allow read of XYZ files with multiple lines of header information
TD-19817	Base	Attribute Manipulator: add “String start chainage” to String Properties
TD-19806	Base	CodeMeter Runtime ticked on as the default
TD-19454	Base	Compile and run a drag and dropped .4dm file
TD-19314	Base	Env Editor: add the AutoUpdater env variables
TD-19547	Base	Fixed options producing old strings: Tins =>Tin analysis =>Slope =>Slope analysis 2, Tins =>Tin analysis =>Slope
TD-19439	Base	MTF menu is now a little wide when pinned up!
TD-19420	Base	Object Tree ordering in Tree mode
TD-19399	Base	Rename Registry file to Configuration file
TD-19242	Base	Report the object name when restore fails due to mising file
TD-19232	Base	Super inquire item type of Segment grade 1 in
TD-19453	Base	Tin Add to Model: remove tin from existing models
TD-19480	Base	Tin colour on Tin Edit menu
TD-18937	CAD	extend CAD=>Vertex to a tin
TD-19230	CAD	Extra modes for CAD=>Vertex=>Extend by length
TD-19452	Chains	Command to write parameters to a file
TD-19231	Chains	Copy and paste buttons for Chain Parameters Editor panel
TD-19192	Chains	Set chain parameter value using an env
TD-19360	Chains, Macro Language	Macro call and chain command check is windows version supporting win11
TD-19235	Design	Drill and Blast pattern creator
TD-19228	Drafting	CAD Table from CSV - Allow merging of Header Row
TD-19055	Drainage	Create drainage.4d from model to load drainage.4d
TD-19497	Drainage	CSD: Warn about zero area when saving catchment data
TD-19234	Drainage	DDA: calculated ku method attribute set with both text and integer values
TD-19429	Drainage	DDA: Show runoff volume on rainfall runoff graph for Drains users
TD-19342	Drainage 2D	1d approach flow and catchment strings extend/shorten
TD-17531	Drainage 2D	DDA2D: Add grate depth tolerance for 2d approach flow
TD-19348	Drainage 2D	Roadflow: Laurenson Hydrology Method Added
TD-19200	Drainage, Drainage 2D	DDA: Speed up of starting analysis when reading very large drainage.4d file
TD-19546	File I/O	Read STL file
TD-19543	File I/O	Write Collada DAE tweaks
TD-19264	Macro Language	add pattern to File_Box
TD-19389	Macro Language	Drop point to trimesh
TD-19199	Macro Language	Get and set trimesh solid
TD-19252	Macro Language	get view placement
TD-19485	MTF	MTF not supporting use of some string types.
TD-19565	MTF	Smart chainages, add max left, right offsets to snippet from model of strings
TD-19473	Other	AutoUpdater - Allow copy from the log box
TD-19209	Plotting	Cuts: Warning message in output window for labels that won't fit
TD-19461	Plotting	Long Section Plotting: Add chainage range attributes when plotting to model
TD-17968	Plotting	LPlot PPF: Corridor Model Draw Order buttons
TD-17972	Plotting	Melbourne LPlot PPF: Corridor Model Draw Order buttons
TD-19463	Plotting	MPS: Text Node $variable - $if_next_page<> and $if_previous_page<>
TD-19465	Plotting	MPS: Text Node $variable - $node_name
TD-17970	Plotting	Pipeline LPlot PPF: Corridor Model Draw Order buttons
TD-19441	Plotting	PPF Editors: Grid Control Box Toolbar
TD-17969	Plotting	Water LPlot PPF: Corridor Model Draw Order buttons
TD-17971	Plotting	XPlot PPF: Corridor Model Draw Order buttons
TD-19315	Sharing	Project =>Sharing: mods to the menu
TD-19400	Sharing	Share colours for object tree
TD-18971	Survey	SDR Field editor - Pause and recalc option

V15.0 C1b Release Notes

New

Key	Component	Summary
TD-19000	12d Field - General	Added new instrument, Topcon Generic TPS.
TD-12648	Base	Image dumps with a FOLDER of slx files
TD-19118	Base	Project Launcher: add the 12d Macro manual pdf to the icons at the bottom right
TD-19119	Base	Project Launcher: Recent Projects: add a Refresh option
TD-19092	CAD	Better finish message for CAD paste pre postfix panel
TD-19170	Drainage 2D	Quadtree to run without SGS
TD-18819	Drainage 2D	Reduce DDA2d output window messages
TD-19081	Drainage 2D	Roadflow Direct Rainfall Variable temporal patterns for NZ implemented
TD-10943	Drainage 2D	TCF Editor command line options for Direct Rainfall
TD-19082	Drainage 2D	TCF Quad tree 3+ level grid tin complete
TD-19164	Drainage 2D	TCF Quadtree to skip writting xf file for qpp runs
TD-19027	Macro Language	12dPL Choice Box: flag to define which search type
TD-19029	Macro Language	Creating polymesh for Planar Polygons to trimesh
TD-19096	Macro Language	Get and set property controls for a Water String
TD-19028	Macro Language	Get the chainage for the nth vertex of a string
TD-19026	Macro Language	Plan distance between two coords
TD-19030	Macro Language	Source box Access to process only selected vertices
TD-19127	Plotting	MPS: More progress messages while navigating
TD-18966	Survey	Check Breaklines: report when nothing found
TD-18967	Survey	Check Strings: report when nothing found

V15.0 C1a Release Notes

New

Key	Component	Summary
TD-18623	12d Field - General	12d Field codes opcodes: turn into choice list
TD-16459	12d Field - General	Ability to disable battery level warning wasn't available in "12dF_Battery_Levels.4D"
TD-16503	12d Field - General	Add attributes for working directory and model
TD-14607	12d Field - General	Add height of secondary GPS instrument to target heights panel.
TD-13991	12d Field - General	Add interface for Leica ATR visibility settings (older instruments)
TD-17180	12d Field - General	Add macro "AusGeoid_To_Points_Panel.4do to the menu
TD-18004	12d Field - General	Add new Trimble searches, turn and search to GNSS location.
TD-16606	12d Field - General	Add phase centre correction to device setup
TD-16434	12d Field - General	Add setting to force all 12dField panels inside the main 12d screen.
TD-16935	12d Field - General	Add setting to not add tolerances page to setout tabs to setout panels
TD-14628	12d Field - General	Add standard deviations to the helmert setup attributes
TD-16516	12d Field - General	Allow 12dF_AUTO_START_PANEL.4D to start multiple panels
TD-15720	12d Field - General	Allow Leica guide lights toggle to low/medium&high
TD-18342	12d Field - General	Allow setting of TPS sim base and measured point without bringing up the panel when using standard setup
TD-17902	12d Field - General	Allow TPS combined n-value to be long/lat or east/north based.
TD-18709	12d Field - General	Allow tps or gps hotkey files, 12dF_TPS/GPS_HOTKEY_BARS.4d
TD-16492	12d Field - General	Allow user to disable remembering of last IR/RL target heights.
TD-16433	12d Field - General	Always prompt to use out of tolerance multiface reading in setout panels.
TD-17228	12d Field - General	Auto check for 12dF control bar position if user tries to start 12dF while already running.
TD-18622	12d Field - General	Automatically close TPS simulator settings panel on exiting 12dField
TD-16936	12d Field - General	Basic string setout, make single string default option and set control as the selected single string.
TD-17247	12d Field - General	Enable 12dF config files to be stored in a special directory 12dF_current_settings
TD-17144	12d Field - General	Enforce strict control model id's, no duplicate ids and no blank ids
TD-17917	12d Field - General	Extra hotkeys fst/std std/stk & fst/ftk toggles.
TD-17835	12d Field - General	GPS, geoid, (n value) calcs separated from the helmert localisation
TD-18592	12d Field - General	Helmert Panel: improve enable/disabling of buttons.
TD-17978	12d Field - General	Leica TPS spiral search needs the initial GPS XY/XYZ options as well.
TD-17523	12d Field - General	Possible to set a null target/extra target height
TD-16453	12d Field - General	Pressing STOP on panel should cancel an ATR search
TD-16138	12d Field - General	Prevent target height next hotkeys being pressed while instrument changing modes.
TD-16740	12d Field - General	Rearrange items on the 12d Field Utilities menu
TD-18591	12d Field - General	Resection panels, details tab, scales factors made more consistent
TD-16397	12d Field - General	SDR Pickup to capture and store secondary setout panel attributes
TD-17820	12d Field - General	Shutdown button only added to control bar when both ctrl&menu unticked.
TD-17476	12d Field - General	Some 12dF panels should not be allowed to have multiple copies.
TD-17542	12d Field - General	String reference is not being stored as attribute when smart find is on.
TD-18779	12d Field - General	Target height box: warning when extra height is set
TD-16998	12d Field - General	TPS simulator settings panel not available as a hotkey
TD-17900	12d Field - General	TPS, better searching ability via combined 2nd GPS inst and cube search
TD-10486	12d Field - General	Update TPS Helmert/LSA panels
TD-17810	12d Field - General	Values not updating while the GNSS status panel was open.
TD-18711	12d Field - General	Write helmert/least squares details to a visualisation model.
TD-10485	12d Field - General	Z difference display in Helmert and Least squares resection panels
TD-17906	12d Field - General, Survey	Allow choice for least squares orientation by averaging or longest leg.
TD-16774	12d Field - Pickup	Add hotkey for delete last string opcode
TD-18428	12d Field - Pickup	Add the one touch MR/MS setting into SDR Settings panel
TD-18340	12d Field - Pickup	Allow auto-save of project when SDR function is created.
TD-16460	12d Field - Pickup	Allow SDR pickup to store all setout panel attributes
TD-18337	12d Field - Pickup	Make the "Fast recalc" button more prominent on the SDR Pickup panel.
TD-18341	12d Field - Pickup	Move the foresight panel selection into the SDR panel
TD-11463	12d Field - Pickup	Multicode should prompt for Attributes
TD-18582	12d Field - Pickup	Recalc now called when storing check shot.
TD-16668	12d Field - Pickup	SDR Pickup, camera12d.exe needs a little bit of work.
TD-18338	12d Field - Pickup	SDR Pickup, pop up a please be patient dialog if writing the .12dField xml file.
TD-18336	12d Field - Pickup, Survey	SDR: disable "use coordinate commands (Opcode 2)" if control model enabled.
TD-14044	12d Field - Setout	12dF attribute so_shift_z was not available on the nav page
TD-17367	12d Field - Setout	Add hotkeys for set value TPS rotate left/right/up/down
TD-18888	12d Field - Setout	Added hotkeys for TPS auto turn settings.
TD-18559	12d Field - Setout	Allow 20 user definable text lines in nav and info pages.
TD-18455	12d Field - Setout	Grid setout: non intersecting lines allowed
TD-16812	12d Field - Setout	Iterate to distance normal from tin/trimesh
TD-17512	12d Field - Setout	Multiple minor tidy ups for point setout panel.
TD-17540	12d Field - Setout	Not clearing all previous measured values prior to a new measurement, WIP.
TD-17530	12d Field - Setout	Point setout, allow use of a trimesh vertex.
TD-17556	12d Field - Setout	Rename stake height diff and shift value attributes
TD-16789	12d Field - Setout	Rename string setout panels to 'Basic' and 'Advanced'.
TD-16776	12d Field - Setout	Rename Tin Setout Panel to 'Surface' and tweak,
TD-17535	12d Field - Setout	Secondary control string was always returning extended drop.
TD-14703	12d Field - Setout	Store point setup, change Point/Line to tickbox
TD-18901	12d Field - Setout	Surface setout, better warning for no 3d drops to supertins.
TD-17359	12d Field - Setout	TPS Positioning selects should work from section views.
TD-18848	12d Synergy Integration	Create Template and Function and commit
TD-18220	ADAC	Adac_XSD_to_MetaConnex_Panel
TD-18221	ADAC	Copy_String_Attribute_Group_to_Group_Panel
TD-18527	ADAC	New ADAC chain files
TD-18501	Base	12d Usage Report (Cloud): access settings configuration file
TD-18268	Base	About 12d Model: Display when project is Object Tree
TD-17043	Base	Add all removed tins: Pre*post stem to create models
TD-17624	Base	Add extrude snap button to snaps lists
TD-16914	Base	Additional Text Border types
TD-16080	Base	Allow GDA options when maintentance module is on
TD-18306	Base	Allow Text strings to be convert to string types other than Text string
TD-17027	Base	Attribute editor: search button
TD-17985	Base	Attribute manipulator: Add comment type
TD-17243	Base	Attribute Manipulator: Node/Link name to and from Node/link attributes
TD-17052	Base	Attribute manipulator: segment bearing and grade
TD-17115	Base	Attribute Manipulator: values for internal, external, thicknesses for pipes
TD-17809	Base	Classify super string fills with attributes
TD-18684	Base	Classify Symbols: Add symbol angle
TD-18190	Base	Commas in numbers for Check Points in a project
TD-17417	Base	Coord System box for Write Arcview - write out projection in WKT format
TD-17140	Base	CPATH variable may not include USER directory when 12d starts
TD-16205	Base	Create simple extrusions from complex extrusions
TD-15524	Base	Custom menus: Ability to reset menus to default 12d without restart
TD-18617	Base	Delete empty models: checking for model attributes
TD-18218	Base	Delete_Empty_Attributes_Panel
TD-14952	Base	Drape mode: Drape null vertices only
TD-16974	Base	Drape: Colour draped string by triangle colour
TD-17108	Base	Drape: string coloured by triangle colours
TD-17186	Base	Enable widget pages for Chainage Offset Filter Panel
TD-17693	Base	ENV editor too big for tablet.
TD-14823	Base	Env variable to remove "12d XML project data" from the menu
TD-16882	Base	Filter points by chainage and offset
TD-17295	Base	GDA94 to GDA2020: don't show 7parameter unless they have the Survey module
TD-17748	Base	Georeference rasters created by option "High Resolution OpenGL Image" using the current plan view settings
TD-17672	Base	Height adjustment panel: allow super tins
TD-17375	Base	Height adjustment: apply new Projection Box with GSB
TD-14775	Base	LAS Import now defaults all categorgies to true
TD-17538	Base	Length 3d: include super alignments
TD-14939	Base	Load super inquire styles on start-up
TD-17682	Base	Made topmost buttons user configurable.
TD-17150	Base	Make trimeshes work with polygon choices in Source box - first step
TD-18051	Base	Map File BIM Object Create Apply
TD-16165	Base	Map File: Apply segment colours and segment linestyles
TD-16115	Base	Map file: apply segment linestyles and segment colours
TD-16585	Base	MetaConnex Editor
TD-18071	Base	MetaConnex File Editor
TD-18032	Base	Migrate pre V15 project to V15 Guid or Object Tree project
TD-16396	Base	Missing method to get tin from computator data
TD-7883	Base	Open project to allow open in a new session
TD-17959	Base	Options.txt and Crash logs: add field to say if current project is Object Tree or not
TD-17845	Base	Panels: Highlight Active Tab on a panel
TD-16078	Base	Point Cloud Create Cache
TD-18085	Base	Point Clouds: Drawing speed ups
TD-18049	Base	Projection xml editor: Inclusion Filter for Set_ups
TD-17121	Base	Projection XML editor: new editor panel
TD-17155	Base	Rotated Grid Panel to output super strings
TD-13216	Base	Source box for multi Trimesh Boolean Union
TD-19722	Base	Super inquire to show (the new five) super string justification
TD-18121	Base	Super Inquire: Add more Plot Frame properties (ie Scale, Origin, Rotation)
TD-16978	Base	Super string: add round or culvert, thickness and Internal size tick to Create >Pipe
TD-18812	Base	Super string: hard code Close and Open super string
TD-18808	Base	Support Nearmap Google Earth
TD-15193	Base	Tin Aspect analysis: add auto filling model box
TD-15055	Base	Tins: Add a copy tin to the Slope Analysis option
TD-15054	Base	Tins: Add a copy tin to the tin Aspect Analysis option
TD-17599	Base	Tins: Create break segments
TD-17622	Base	Tins: Create naked points and triangles in the tin
TD-18528	Base	Update files for HTML section plot
TD-17340	Base	Version numbers for 12da/12dXML
TD-18016	CAD	12d acad paste: add model prefix
TD-17729	CAD	Add the key "o" in move segment for offset
TD-14439	CAD	CAD Leader: add the tin properties crossfall, slope, grade, colour, name, aspect etc
TD-16595	CAD	Cad text suggested alignment
TD-16504	CAD	Drafting Elements: Allow Utilities: "H-Z =>Translate" to operate on them
TD-18935	CAD	Extend 3d vertex to a typed level
TD-16594	CAD	Heads-up display: showing distance/angle/bearing while editing cad lines
TD-16721	CAD	Heads-up display: X, Y, Z when placing point
TD-16597	CAD	Make suggested CAD text location snap-able
TD-16909	CAD	Move segment
TD-18890	CAD	new CAD vertex extend 3D to level
TD-18030	CAD	One point tin slope and direction label
TD-16596	CAD	Project settings for Enhanced CAD
TD-7973	Chains	Chain Parameter: Give warning when change command type for loosing all existing parameters
TD-18322	Chains	Commands to set chain parameter value
TD-15325	Chains	Create model: Transfer field value when tick untick use parameters
TD-14976	Chains	Delete all project attributes
TD-15512	Chains	files and deletes: Transfer field value when tick untick use parameters
TD-18892	Chains	Improve checking number of elements in model
TD-18407	Chains	Include $model_attribute in chain parameters
TD-18035	Chains	Is a project Object Tree or not
TD-15864	Chains	Prevent panels using Property Sheets from being used in Chain Parameters
TD-17854	Chains, Macro Language	Chain to macro - test idea of new chain command to set chain parameters
TD-17855	Chains, Macro Language	Chain to macro: parameter file of children chain not get read when inherited from parent
TD-19037	Design	Create modifiers, layer selection lists were showing silent layers.
TD-17148	Design	Create Z values from Tin Differences outputs super strings and panel modernisation
TD-18805	Design	Filter unused edge names from the trimesh edge info structure.
TD-14951	Design	Tin Depth Range Polygons - Add option to Clean model of polygons
TD-16577	Drafting	Allow update the information tin when editing leader
TD-17147	Drafting	Drafting panels to use the full data source
TD-16657	Drafting	Information leader with General XYZ and General XY info
TD-17028	Drafting	Leader hook gap work with other text border
TD-16304	Drafting	Remove association of many drafting elements
TD-16700	Drafting	Remove restriction of header merging cell of header line
TD-15376	Drafting	Transform for non associated drafting elements
TD-17989	Drainage	Catchment Creation Tool Using Strings
TD-17104	Drainage	Coding of Concept Stormwater Design option
TD-17988	Drainage	Convert Water strings into Super strings
TD-17388	Drainage	Create Water Network from Points and Strings
TD-14605	Drainage	Critical Storm label issues for ARR 2019 and not working in non-ARR 2019
TD-17119	Drainage	DDA - Generate warning/error for duplicate link names
TD-15940	Drainage	DDA add dyn min surface area - defaults and overrides
TD-17146	Drainage	DDA Box plot, Critical storm and Durations critical storms graphs should only use data from current run
TD-17617	Drainage	DDA improved message when design frequency is outside range defined in hydro file
TD-13675	Drainage	DDA Report Weir Cd at the maximum flow
TD-16087	Drainage	DDA: Change default INERTIAL_DAMPING from NONE to PARTIAL
TD-15913	Drainage	DDA: Create EPA SWMM file from DDA
TD-17215	Drainage	DDA: Delete submergence ratio attribute before dda run
TD-15998	Drainage	DDA: FHWA weir needs to handle overtopping
TD-15997	Drainage	DDA: FHWA weir needs to transition Cd between "shallow" and "deep" curves
TD-16019	Drainage	DDA: FHWA Weirs need to report DS depth
TD-14304	Drainage	DDA: Flooded width calcs
TD-16043	Drainage	DDA: Graph Cd for Weirs
TD-15447	Drainage	DDA: Lost flows should be reported as an error at the end of the simulation
TD-15633	Drainage	DDA: Make Shape summary in .rpt file optional
TD-17532	Drainage	DDA: Messages regarding Grade and Xfall are only valid for "On-grade" pits
TD-16086	Drainage	DDA: RTP to HTML converter needs to account for Froude and Cd in header
TD-17271	Drainage	DDA: Sort graphs by duration not solved order
TD-15568	Drainage	DDA: Trap and report undefined link names
TD-15567	Drainage	DDA: Trap and report undefined sump levels
TD-17113	Drainage	DDA: WNE add arguments to allow startup on a particular tab, autosolve etc
TD-16162	Drainage	Drainage HTML reports panel: title update to include capitals
TD-17272	Drainage	Drainage to zip: Clear console removed
TD-15731	Drainage	drainage.4d load on demand
TD-16384	Drainage	Dynamic Culvert: Add Tide Gate flag to prevent culvert backflow
TD-15945	Drainage	Dynamic Culvert: Set INERTIAL_DAMPING = PARTIAL
TD-628	Drainage	Dynamic Drainage: Use pit capture curves at either end of a basin link to control basin discharge
TD-16088	Drainage	Dynamic Graphs: Add "Clear Selections" button
TD-15060	Drainage	Hydro file macro call - get storm by id implemented for ARR 2016 bins
TD-15424	Drainage	Inlet Capacity Panel: Prevent 0 road grade and crossfall
TD-18878	Drainage	Node riser display in perspective opengl
TD-16139	Drainage	Project Settings: Water String Chord to Arc setting
TD-18018	Drainage	Time of Concentration Builder
TD-15401	Drainage	Triangulate grate levels
TD-15501	Drainage	Use a default inlet rating curve if road xfall and road grade are unknown or outside the range in the drai
TD-16875	Drainage	Water Hydro file to have 20 columns in the ifd table
TD-315	Drainage	WNE always allow create from Import
TD-16832	Drainage	WNE choice box to set allow clear property set to true
TD-17266	Drainage	WNE Cover RL and Grate RL not updating on Set Node Details if values that were previously entered are not valid
TD-15626	Drainage	WNE Import/Export to export multiple diverging ds pipes
TD-17307	Drainage	WNE Single Node for FW Bypass
TD-17878	Drainage	WNE: New widget arrangement in navigation (top) section
TD-17879	Drainage	WNE: Replace old terminology. Pits/Pipes with Nodes/Links etc.
TD-14350	Drainage	WNE: Slight shuffle of fields for efficiency gains
TD-15400	Drainage	WNE: speed up load time of water model
TD-14192	Drainage	WQ: Create attribute groups for Infiltration System Treatment process
TD-14199	Drainage	WQ: Create Generic Treatment process
TD-14200	Drainage	WQ: Create Junction Node
TD-14061	Drainage	WQ: Create Link Node network from Music MSF File
TD-14202	Drainage	WQ: Create Primary Link
TD-14198	Drainage	WQ: Create Rainwater Tank Treatment process
TD-14201	Drainage	WQ: Create Receiving Water Node
TD-14204	Drainage	WQ: Create Secondary Link
TD-14064	Drainage	WQ: Results graph enhancements
TD-18377	Drainage 2D	12d channel earthwork designs to TUFLOW ESTRY
TD-16716	Drainage 2D	Changes to support Tuflow release 2020 10 AA
TD-16605	Drainage 2D	Create Empty Models missing help button
TD-16351	Drainage 2D	DDA2D: Link with Tuflow 2020-08-ZA then ZB
TD-15921	Drainage 2D	DDA2D: Update to Tuflow libraries 2020 06 ZB
TD-15691	Drainage 2D	Drainage 2d sx connection zone - move node xy not end of string
TD-15996	Drainage 2D	Read TUFLOW QuadTree TMO and TGO files
TD-16423	Drainage 2D	Set tuflow_quadtree_tests_4d on by default
TD-12316	Drainage 2D	String Attribute IO to spreadsheet to have delete option on import
TD-18962	Drainage 2D	TCF Editor to allow empty models
TD-15812	Drainage 2D	TCF editor: disable DP for GPU
TD-18794	Drainage 2D	TCF Quadtree: Add method to link and validate xf files to 12d grid tins
TD-16182	Drainage 2D	Time Lines - Allow TGO results
TD-18489	Drainage 2D	TUFLOW 2020-AB Release
TD-17174	Drainage 2D	TUFLOW command file to lower case
TD-16158	Drainage 2D	TUFLOW Command Update for QuadTree
TD-19070	Drainage 2D	TUFLOW exe and DLL update to 2020 10 AC
TD-15965	Drainage 2D	TUFLOW Quad Tree and SGS Commands
TD-17071	Drainage 2D	TUFLOW QuadTree TMO Grid Tin Display
TD-17400	Drainage 2D	TUFLOW SGS to Roadflow and TCF
TD-4459	Drainage 2D	TUFLOW Tin Results Settings to show only available results
TD-15761	Drainage 2D	TUFLOW update to June 2019 Version
TD-18378	Drainage 2D	TUFLOW: 1d channel import
TD-18379	Drainage 2D	TUFLOW: culvert export
TD-18380	Drainage 2D	TUFLOW: ESTRY 1D visualisation
TD-15850	Drainage 2D	Update to Tuflow libraries 2020 06 ZA
TD-17419	Drainage 2D	Use new projection-MapInfo File in TCF editor
TD-17110	Drainage, Drainage 2D	WNE: Sag Pit from global to local
TD-15634	Drainage, Dynamic Water Supply	Add error messages to EPA:SWMM/NET import
TD-16411	Drainage, Dynamic Water Supply, Sewer	Water string purpose routine needs water supply
TD-18481	Dynamic Water Supply	Incorporating the DWS Rule/Control builder into the WNE
TD-15714	Dynamic Water Supply	Solve for multiple demands at a node
TD-15713	Dynamic Water Supply	Support multiple demands at a node
TD-18913	EPlan	Traverse Spreadsheet Object Tree aware
TD-16894	File I/O	12d Writer: export of super tins to include component tins
TD-15222	File I/O	12d Writer: new choice to output only tins and cloud string in hex floats
TD-15723	File I/O	Add model attributes choice to write 12da xml panels - step 1
TD-13314	File I/O	Add new DGN2020 64 bit engine for reading DGN
TD-15766	File I/O	Add user options in reading in model attributes from 12da
TD-18626	File I/O	ARCViewShape readers: populate attribute list by default
TD-17930	File I/O	Disable older DGN DWG reader engines and default to 2020 64bit
TD-15127	File I/O	KML reader: rewrite as hard code
TD-18215	File I/O	KML_Export_Panel
TD-17330	File I/O	LandXML 1.2 reader: read in drainage strings
TD-17411	File I/O	Mapinfo write panel use new projection box
TD-18625	File I/O	Mid/mif readers: populate attribute list by default
TD-18122	File I/O	Options to Convert between Ascii and Binary XML
TD-15830	File I/O	Reading 12da/xml with already existing tins
TD-17023	File I/O	Write 12da/12dXML: Ouput super tin components
TD-18405	File I/O	Write Collada DAE add normal vectors and up direction
TD-12536	File I/O	xyz general: pre postfix field: warning message
TD-15844	IFC	"header" information
TD-16737	IFC	IFC Express Writer: Exclude 'network' attribute group for IFC export in water strings
TD-15215	IFC	IFC Reader: Add Label style to Alignment tab
TD-17600	IFC	IFC Reader: Read in tin breaklines
TD-15216	IFC	IFC Reader: Tick on Alignment to keep both strings
TD-17738	IFC	IFC Writer: Add (X,Y) rotation to Placement Tab
TD-15122	IFC	IFC Writer: Add Coordinate Reference System tab
TD-15716	IFC	IFC Writer: Add schema for 4.3 to IFC Writer
TD-15572	IFC	IFC Writer: Add tick to not break up segments of super strings
TD-15500	IFC	IFC Writer: Add tickbox to choose to export strings as extrusions along a path in IFC4 and IFC4x1
TD-16450	IFC	IFC Writer: Allow tins to have any IfcElement type
TD-15842	IFC	ifc Writer: Attribute group for ifc BuiltElement parameters
TD-15843	IFC	IFC Writer: Attribute group for ifc Element Assembly parameters
TD-18366	IFC	IFC Writer: CAD Circle
TD-17951	IFC	IFC Writer: Change drainage to water
TD-16455	IFC	IFC writer: Control default debugging attributes with 'Ifc_Default_Atts' environment variable
TD-15806	IFC	IFC Writer: Export 12d Assembly Elements
TD-15391	IFC	IFC Writer: Export extruded strings using IfcExtrudeAreaSolid with arbitrary profile
TD-17426	IFC	IFC Writer: Export Project attributes
TD-15528	IFC	IFC Writer: Include model name in spatial structure entities
TD-15841	IFC	ifc: Attributes for Spatial Structure tree and name
TD-15847	IFC	ifc: ifcElement Attributes for Description
TD-17513	IFC	IFCPRESENTATIONLAYERASSIGNMENT
TD-16558	IFC	Set the Output Drainage as IFC System to be ticked by default
TD-19024	IFC	Use IFC Presentation Layers for Models
TD-17138	IFC	Writer: Property Sets for top attribute groups
TD-15065	Installation	Added a tickbox to install trimble precision runtime during installation
TD-18276	Installation	Auto Updater:Removed all downloaded exe's after successful installation
TD-17465	Installation	AutoUpdater: Allow custom download location with env var
TD-17437	Installation	AutoUpdater: Auto Cleanup exe's
TD-18275	Installation	AutoUpdater: Check for open sessions of 12d model before starting download
TD-18382	Installation	AutoUpdater: Check if new version is available before showing panel
TD-18421	Installation	AutoUpdater: Error messages when running auto-updater
TD-17069	Installation	AutoUpdater: in depth checking for running instances
TD-17436	Installation	AutoUpdater: Naming scheme for downloaded exe's
TD-18128	Installation	Disk Space checks for Auto Updator
TD-19157	Installation	Installer for 12d Model: add the latest CodeMeter install program to the 12d installer
TD-16809	Installation	Monitor and report on installation to user
TD-17122	Installation	Silent install for Trimble precision SDK Redistributable in installation
TD-17926	Macro Language	2D Helmert
TD-17924	Macro Language	2D Helmert parameters from a list of points
TD-17925	Macro Language	3D Helmert parameters from a list of points
TD-16995	Macro Language	Add fuzzy logic calls to macro language
TD-16966	Macro Language	Add macro calls to set sizing options of widgets
TD-16302	Macro Language	Additional macro calls for Process_Handle
TD-16969	Macro Language	Allow macro panels to set the dynamic_sizing property for widget pages
TD-11957	Macro Language	Check attributes
TD-16963	Macro Language	Create a file box with description
TD-15664	Macro Language	Create Macro Null() for a Drainage_Network object
TD-18236	Macro Language	Create_macro_as_child calls to pass down and retrieve macro attributes from the child macro
TD-18133	Macro Language	Creating polymesh for "Planar Polygons to trimesh" call
TD-16958	Macro Language	Cut/fill Trimesh
TD-18616	Macro Language	Delete empty models call with check for model attributes
TD-16964	Macro Language	Disable macro panel chainability
TD-17257	Macro Language	Disjoint Trimesh
TD-18097	Macro Language	Explode text
TD-18223	Macro Language	Explode text border
TD-18254	Macro Language	Fence macro calls to work with trimeshes
TD-18637	Macro Language	Find a system file without giving an Output Window message if it is not found
TD-16960	Macro Language	General call to read files ending with 12da, 12daz, 12dxml or 12dxmlz
TD-14983	Macro Language	Get and set allow holes property of polygon box
TD-16895	Macro Language	Get and Set_drainage_pit_riser
TD-18265	Macro Language	Get equality chainage from raw chainage
TD-16470	Macro Language	Get file times: created, modified, accessed
TD-18431	Macro Language	Get geodetic datum data
TD-16218	Macro Language	Get nodes/links by purpose from drainage.4d
TD-16965	Macro Language	Get point scale factor and nvalue
TD-18266	Macro Language	Get raw chainage from equality chainage
TD-18995	Macro Language	Get the number of elements in a model with less model loading
TD-18015	Macro Language	Get_license_client
TD-17528	Macro Language	Gridctrl_Box: function for set cell colour
TD-17256	Macro Language	Heal Trimesh
TD-16957	Macro Language	Intersection of straight line with an element
TD-18036	Macro Language	Is a project Object Tree or not
TD-17250	Macro Language	Join Water string
TD-16469	Macro Language	Macro language support for STL like containers
TD-16897	Macro Language	One call to read 12da, 12daz, 12dxml, 12dxmlz file format
TD-16961	Macro Language	One write call based on file extension 12da, 12daz, 12dxml, 12dxmlz
TD-14875	Macro Language	Panel_prompt now supports SLX format data
TD-17469	Macro Language	Read 12da 12dxml with choices for model and project attributes
TD-17475	Macro Language	Remove a tin out of a containing model
TD-17406	Macro Language	Return the local path of an existing Synergy folder
TD-17864	Macro Language	Return the name for files of model, tin, view on disk
TD-18893	Macro Language	Set trimesh edge by string
TD-14441	Macro Language	smart chainages calls
TD-18096	Macro Language	Updates to Trimesh and Line_cut_string
TD-16959	Macro Language	Write 12da, 12daz, 12dxml, 12dxmlz files
TD-18406	Macro Language	Write Collada DAE files
TD-18482	MTF	Add attribute manipulator modifier
TD-18645	MTF	Add default behaviour for named grades when link/s don't exist.
TD-18490	MTF	Apply attributes, add length from start/end chainage
TD-18502	MTF	Copy layer, should allow link insert whey same offset but different height.
TD-18621	MTF	Create MTF Seed file Menu tool
TD-16352	MTF	Create strings/sections/tins, make strings/sections optional
TD-16826	MTF	Modify by 2 links should not care if multiple strings found
TD-18082	MTF	MTF: Speed up snippet processing.
TD-17498	MTF	Smart Special Chainage File
TD-17943	MTF	Snippet AutoParameter : _MODEL_ATTRIBUTE
TD-15035	MTF	Snippets, add call to delete a project attribute
TD-17618	MTF	Template modifiers panel, add 'Edit modifier' to right click choice list
TD-17897	Other	UsageLog to report 12d model version number
TD-15145	Plotting	Add model name as PDF layer of plan frame of MPS
TD-15635	Plotting	allow literal "$" from a TBF or drawing register
TD-17907	Plotting	Better error messages for CSV Drawing Register
TD-17915	Plotting	Change corridor labeling column name from "Create Set #" to "Define Set #"
TD-15338	Plotting	Extra TBVs for Water Node Diagram PPF
TD-16405	Plotting	L Sect Plot: Simplified Extensive V when Vertical Part Type is Fixed Points Computator
TD-17263	Plotting	Long Section Plotting: Change panel wording of 'Convert to super alignment for plotting' option
TD-18496	Plotting	Long Section: Tin titles length automatically shrinks to size like X Section does
TD-16048	Plotting	MPS - Improved Multi Node pre plotting structure checks
TD-16242	Plotting	MPS - Perspective Frame Dynamic View Details
TD-15337	Plotting	MPS default value changes for the NZ boys
TD-17309	Plotting	MPS Long Section Plot: Simplified Extensive V when Vertical Part Type is Fixed Points Computator
TD-17452	Plotting	MPS Long Section: Ignore String to profile IDs when reading from library file
TD-16601	Plotting	MPS: key to be an alternate button for accepting positions
TD-16393	Plotting	MPS: 3D PDF Frame Dynamic View Details
TD-16724	Plotting	MPS: Escaping delete Node pop-up should select No instead of Yes
TD-16600	Plotting	MPS: Frame View Details 'view' field naming tweaks
TD-15639	Plotting	MPS: Highlight active viewport weight
TD-16416	Plotting	MPS: Inheritance for 3D PDF Frame Reference Node View Details
TD-16232	Plotting	MPS: Inheritance for 3D PDF Frame Reference Nodes
TD-16127	Plotting	MPS: Inheritance for Frame Reference Node Margins
TD-16034	Plotting	MPS: Inheritance for Model Reference Nodes
TD-16347	Plotting	MPS: Inheritance for Perspective Frame Reference Node View Details
TD-16230	Plotting	MPS: Inheritance for Perspective Frame Reference Nodes
TD-16233	Plotting	MPS: Inheritance for Plan Frame Reference Node View Details
TD-16126	Plotting	MPS: Inheritance for Plan Frame Reference Nodes
TD-16348	Plotting	MPS: Inheritance for Section Frame Reference Node View Details
TD-16231	Plotting	MPS: Inheritance for Section Frame Reference Nodes
TD-16035	Plotting	MPS: Inheritance for Symbol Reference Nodes
TD-14799	Plotting	MPS: Loose ordering of Nodes by default to match standard workflow
TD-15638	Plotting	MPS: Make 'Plotter type' field inherited
TD-14893	Plotting	MPS: Minor changes/improvements for pre plotting check messages
TD-15340	Plotting	MPS: New text $variable: $folder
TD-15339	Plotting	MPS: New text $variable: $project
TD-15636	Plotting	MPS: Prompt to save current configuration if unsaved changes present when reading in a .12dmpsf
TD-14735	Plotting	MPS: Remove misleading standard plotting progress messages
TD-15136	Plotting	MPS: Remove underscores from Plot mode field choices
TD-16346	Plotting	MPS: Section Frame Dynamic View Details
TD-16334	Plotting	MPS: Smarter Copy/Paste handling of 'use to populate title block' Frame field
TD-16406	Plotting	MPS: Text Node $variables - 4 $variables for chapter page numbers
TD-14697	Plotting	MPS: Title Block tick box for use of scales in MPS Frames
TD-18492	Plotting	MPS: Title Block: Stop OPW spam of 'File not found' messages while navigating
TD-14798	Plotting	MPS: Warning when Title Block appears before populating Frame
TD-15425	Plotting	MPS: Water Node Diagram Frame: Network model override
TD-15342	Plotting	MPS:Remove Active Tick Box from Book Node
TD-18495	Plotting	Plotting: Title Block: Drawing Register: Add .xlsm extension to 'Register file' browse
TD-15336	Plotting	Water Node Diagrams plot - node order
TD-15335	Plotting	Water Node Diagrams plot: Water model override in MPS special chapter
TD-15341	Plotting	X Section Plotting: Title Block $variable: $model_name
TD-18376	Rivers	River xsection interpolation using chords
TD-15081	Sewer	Sewer: Recalc PCs and Create HCs for entire sewer model
TD-11456	Sharing	Sharing of super tins
TD-16266	Standard strings	Create Grid String does not use keep the messages flowing
TD-16977	Standard strings	SS Editor: String attributes
TD-16976	Standard strings	Super string Create: "not specified", " general" and "no height" as "String type" choices
TD-14936	Super Alignment	"Intersection" part for super alignment
TD-2716	Super Alignment	Additional fixed arc parts
TD-17865	Super Alignment	Computator Kret/Culdesac Create: Right Side Drive Option
TD-13555	Super Alignment	Copy SA vertical segments computator
TD-18222	Super Alignment	Equality Chainage: Add to Horizontal and Vertical Segment tables and SA tables
TD-4796	Super Alignment	Extend vertical computator point/grade to horizontal named parts
TD-1508	Super Alignment	Floating Arc From End
TD-3580	Super Alignment	Highlight Dropped Point Locations for SA
TD-14109	Super Alignment	Horizontal offset for Tin drape computator
TD-18196	Super Alignment	Horizontal segments panel: add raw and equality chainages
TD-3958	Super Alignment	Make "Sameas" works for SA vertical geometry
TD-3457	Super Alignment	SA > Comp > Fx Arc > Centre, Radius
TD-18228	Super Alignment	SA Editor: add raw and equality chainage to Horizontal Segments table
TD-17018	Super Alignment	SA Editor: String attributes
TD-14924	Super Alignment	SA ref table created with soft reference on
TD-17500	Super Alignment	SA with Chainage Equality : CAD Table and Report
TD-17026	Super Alignment	SA: new Options option
TD-17499	Super Alignment	Section View SA annotation additions
TD-6260	Super Alignment	Start and End Extensions for fixed line computator by 2 points
TD-17712	Super Alignment	Super Alignment Part Editor with Quick CAD Commands
TD-17029	Super Alignment	Thicknesses for Super Alignment
TD-15587	Super Alignment	Tick to turn run chain on and off
TD-5024	Super Alignment	Vert Fx Line from two 3d pts
TD-17319	Survey	Add GSB option into N value settings
TD-18964	Survey	Add string number to String info table
TD-17770	Survey	Allow N value box to have a "None" choice.
TD-17944	Survey	Batter Slope Conformance Report: show equality chainages
TD-18072	Survey	Chainage Equality Report: mods
TD-18965	Survey	Check Breaklines – don’t create blank models
TD-16042	Survey	Flat field file to tree field file with option to control opcodes as children
TD-17133	Survey	GDA2020 for Point scale factor and Measure Bearing Distance
TD-16306	Survey	Geodetic Reporting with Global XYZ
TD-17197	Survey	Height Adjustment: add gsb file of N-values
TD-17194	Survey	Height Adjustment: tick to do reverse of Adjust method
TD-18969	Survey	If no string number don't show the brackets
TD-17945	Survey	Pavement Conformance Report: show equality chainages
TD-18836	Survey	Projection: add Lambert Conformal conic option
TD-17414	Survey	Projection: Survey Data Reduction Function - new Projection Box
TD-17050	Survey	Projections: ISO code fields
TD-16824	Survey	Remove String added to Survey Edit Strings
TD-16283	Survey	SDR Editor for 12dfield file now shows comments at the end of the line
TD-16820	Survey	SDR Editor now allows Find and Find_Replace panels to remain active
TD-14876	Survey	SDR editor now displays string name and heights of selected measurement
TD-14996	Survey	SDR Editor with more cases where coordinates are highlighted
TD-16438	Survey	SDR Flat to Tree should not move Target Heights
TD-18198	Survey	SDR Midpoint Opcodes do not display any errors in log lines
TD-14774	Survey	SDR Opcodes for Offsetting Measurements on SDR Edit menus
TD-17508	Survey	Traverse spreadsheet: new observation type measure-calculated
TD-17255	Survey	TSS Bearing correction for individual observations
TD-18327	Trimesh	Attributes for model name, element name for the trimesh generated from 12D object
TD-15044	Trimesh	Colour and top, bottom and side of trimeshes
TD-14926	Trimesh	Colour trimesh aspect from a range file
TD-14914	Trimesh	Colour trimesh sides (top, bottom and edge)
TD-14927	Trimesh	Colour trimesh slope from a range file
TD-16414	Trimesh	Create a trimesh face from picking 3 vertices
TD-11207	Trimesh	Create Trimesh from scratch
TD-17548	Trimesh	Cut and Fill: attributes for cut and fill objects recording top and bottom tins
TD-17941	Trimesh	Draw polygons of a polymesh
TD-14767	Trimesh	Report trimesh top surface area
TD-16628	Trimesh	Split a trimesh face by selecting a point
TD-17935	Trimesh	Tick box on "Trimesh from 3d planar polygons" to create polymesh
TD-17019	Trimesh	Trimesh Editor: Trimesh attributes
TD-14867	Trimesh	Trimesh healing
TD-17177	Trimesh	Trimesh panels to use full data source
TD-18891	Trimesh	Trimesh Union: Clean model tick box
TD-17743	Trimesh	Trimesh: Polyfaces: a collection of adjacent triangles
TD-14899	Views	Add Tin Settings to Perspective View Properties
TD-17771	Views	E snap to pick on the surfaces of a Super String
TD-15095	Views	Tin Height Render Settings without any module
TD-16044	Volumes	Cut and Fill trimeshes between two tins Step 1
TD-17284	Volumes	Grid Cell Volumes: Not include empty cells, Rotate grid and Label/report on individual cells
TD-16178	Widgets	Show filename of missing images for toolbars etc